SX70 Wood Stains
Boracol
Damp Proof Membrane
Damp Proof Cream
Tanking Slurry Systems
Explore Newton
Shop Wykamol Membranes
Waterproof Membrane Kits
Nuaire PIV units
Extract Fans
Splice Plates
Crack Stitching Bars
Explore Soudal
Fix ALL Rewards!
'Genius Gun' Foam Range
Special Offers
Wonder Grip Hub
Browse All Deals
How To Damp Proof Walls
Woodworm: Ultimate Guide
How To Stop Condensation
How To Seal Window Frames
Soudal 65A - Water Resistant D3 Wood Adhesive is a premier PVA-based adhesive, engineered for exceptional water resistance and durability.
Ideal for both interior and exterior woodworking where high humidity and temperature fluctuation are concerns, this adhesive delivers a transparent, high-strength bond that meets the rigorous D4 class requirements of EN204.
Soudal 65A ensures rapid drying and ease of application across a variety of wood-based materials.
Size
Free Delivery
on orders over £100(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
Great Service
A proudly independent family business with 40 years experience
Soudal 65A Wood Adhesive is formulated with polyvinyl acetate (PVAc), presenting a high viscous fluid consistency that is perfect for woodworking. The adhesive is designed to physically dry, achieving a solid content of approximately 50%. It offers an optimal open time of about 8 minutes at 23°C and 55% relative humidity, allowing sufficient workability before setting. The minimum film-forming temperature (MFFT) stands at 5°C, facilitating application in cooler conditions without losing effectiveness.
This wood adhesive undergoes a physical drying process, where it transitions from a viscous fluid to a strong, transparent film once cured. The pressing pressure required ranges from 1 kg/cm² to 2 kg/cm², making it adaptable to various clamping setups. With its D3 water resistance rating according to EN204, Soudal 65A can withstand exposure to high moisture environments, making it a reliable choice for areas not directly exposed to the elements but still subject to high humidity.
Soudal 65A is easy to apply with a brush, roller, or adhesive applicator. It is especially effective for full surface bonding, with a recommended consumption rate of 80 - 140 g/m², and for assembly, where 160 - 180 g/m² is advised. This adhesive is characterised by its fast drying time and resistance to high temperatures, ensuring quick completion of projects and long-lasting durability.
Superior Water Resistance: Achieves a D3 rating, making it suitable for interior and exterior use where conditions of high humidity are present but without direct exposure to rain or standing water.
High Bonding Strength: Offers robust end strength, ensuring a secure, durable bond capable of withstanding structural movements and weight-bearing loads.
Rapid Drying and Curing: Facilitates a quicker completion of tasks with an efficient setting time, reducing clamping and waiting times significantly.
Versatility in Application: Can be used across a wide range of woodworking tasks, from simple repairs to complex assemblies.
Transparent Finish: Dries clear, maintaining the aesthetic appeal of wood surfaces without the visibility of glue lines.
Temperature Resilience: Maintains its bonding integrity in a variety of temperatures, thanks to its high resistance to thermal changes.
Window and Door Frame Bonding: Ideal for constructing and repairing window and door frames that require a durable, water-resistant bond to meet high structural standards.
Wooden Construction Elements: Perfect for bonding wooden beams, panels, and other structural components in both residential and commercial buildings.
Veneer and Laminate Bonding: Effective for edge-banding with veneers and laminates, ensuring a secure bond to edges and surfaces.
Decorative Surface Applications: Used for bonding HPL and CPL to substrates like chipboard and MDF, suitable for crafting durable furniture and interior fittings.
Complex Woodworking Joints: Excellent for construction bonding including mortise and tenon joints, dovetails, and other intricate wood joinery, providing both strength and aesthetic cleanliness.
Soudal 65A Wood Adhesive is suitable for use on a wide variety of substrates including porous and non-porous surfaces such as wood, carton, laminate, and more.
For effective bonding, the materials should ideally be flat, well-fitting, and compatible with PVA adhesive.
It is crucial that the adhesive performs adequately on non-traditional or mixed materials, hence, conducting a preliminary adhesion test is strongly advised to ensure compatibility and optimal bonding strength.
Thorough surface preparation is key to achieving the best results with Soudal 65A. Ensure that all surfaces to be bonded are clean, dry, and free from dust, grease, or any other contaminants that might impair adhesion. For non-porous surfaces, slightly grinding or sanding can enhance the adhesive's grip. This step is particularly important when dealing with laminates or coated materials where surface smoothness can prevent effective adhesion.
Soudal 65A can be applied using a notched trowel, brush, or via automated adhesive application machines, making it versatile for various project sizes and requirements.
Apply a uniform coat of the adhesive to one of the surfaces to be bonded. It is not necessary to apply adhesive to both surfaces, but coverage should be complete on the chosen application surface. Once the adhesive is applied, quickly align and join the parts together.
After joining, the materials should be firmly clamped. Clamping ensures that the adhesive is evenly distributed and that the bond remains undisturbed during the initial setting period.
The duration of clamping can vary depending on the materials used and the environmental conditions but generally ranges from 1 to 2 hours. Ensure that the clamping pressure is evenly distributed across the joint.
The curing time of Soudal 65A is influenced by several factors including the type of wood, ambient temperature, adhesive volume, and substrate porosity.
Typical pressing times for high-frequency bonding with longitudinal heating are greater than 15 seconds. For decorative finishes, pressing times can be as short as 5-10 seconds.
For assembly bonding, pressing times range from 8-15 minutes. Joints and block bonding require 10-15 minutes under pressure.
When bonding HPL/CPL to plywood in short cycle presses at 70°C, the pressing time is approximately 90 seconds, and for chipboard, it is around 45 seconds.
After the pressing time is complete, remove clamps and inspect the bond for any signs of adhesive squeeze-out or misalignment before the adhesive fully cures. Any excess adhesive should be wiped away with a damp cloth before it dries.
Tools and excess adhesive should be cleaned with water immediately after use. Once Soudal 65A has cured, it can only be removed mechanically. This means any residue left behind after the adhesive has set will need to be scraped or sanded off.
A) Soudal 65A is a water-resistant, PVA-based wood adhesive specifically designed for both interior and exterior woodworking projects. It offers superior durability against humidity and fluctuating temperatures, making it ideal for environments where water resistance is crucial. The product is a high-viscosity fluid that physically dries to form a strong, transparent bond.
A) It holds a D3 water resistance rating, meaning it can handle high moisture environments typical to exterior settings, although it is not intended for direct exposure to water, such as rain or standing water.
A) While primarily designed for wood and similar porous substrates, Soudal 65A can be used on non-porous surfaces, but surface preparation like slight sanding or grinding is recommended to enhance adhesion.
A) For best results, apply the adhesive in conditions with a temperature of at least 5°C and not exceeding 70°C, with a relative humidity of around 55%. The substrate should be clean, dry, and free of dust or grease.
A) Ensure surfaces are clean, dry, and free from any debris, oils, or loose materials. For smoother non-porous surfaces, a light sanding may be necessary to improve the bonding surface.
A) Apply the adhesive using a brush, roller, or a notched trowel depending on the project size. Spread evenly over one surface, and then join the pieces together promptly before the open time elapses.
A) The recommended application rate is 80 - 140 g/m² for full surface bonding and 160 - 180 g/m² for assembly. Ensure an even spread to avoid weak joints or excessive squeeze-out.
A) Pressing times vary by application type: high-frequency bonding needs over 15 seconds, decorative finishes require 5-10 seconds, assembly bondings 8-15 minutes, and bonding joints 10-15 minutes. Curing is influenced by wood type, ambient temperature, and adhesive amount.
A) Soudal 65A typically dries within 8 minutes under optimal conditions, with full curing achieved within 24 hours, allowing for a rapid continuation of work processes.
A) Yes, clamping is required to ensure a tight bond as the adhesive sets. Typical clamping pressure should be between 1 kg/cm² and 2 kg/cm².
A) Absolutely, it is highly effective for edge-banding and surface bonding with veneers, laminates, and other decorative finishes, ensuring a secure and aesthetically pleasing finish.
A) Excess adhesive should be wiped away with a damp cloth before it dries to prevent any hardened residue which can be difficult to remove later.
A) Tools and application equipment should be cleaned with water immediately after use to prevent the adhesive from curing on them, which would make later removal challenging.
A) Yes, Soudal 65A maintains its bond integrity across a wide range of temperatures due to its formulation, which is designed to withstand thermal changes without degrading.
A) Once fully cured, Soudal 65A can be painted over, as it dries clear and forms a smooth surface that can easily be painted or stained.
A) Store in a cool, dry place away from direct sunlight and extreme temperatures to maintain its shelf life and effectiveness.
A) Apply the adhesive evenly, ensure proper surface preparation, correctly align the materials before the adhesive sets, and maintain appropriate clamping pressure and time.
A) Use in a well-ventilated area, wear appropriate safety gear like gloves and goggles, and avoid prolonged skin contact or inhalation of fumes.
A) Yes, its high viscous consistency makes it suitable for vertical applications without dripping, provided it is applied correctly.
A) Exposure to water before curing can compromise the adhesive’s effectiveness. Ensure the adhesive is fully cured before exposing the bonded area to moisture.
A) For most applications, a thin, even layer is sufficient. Applying too much adhesive can lead to extended curing times and may not increase bond strength.
A) While Soudal 65A provides strong bonds, it should be used in conjunction with appropriate mechanical fasteners for structural applications where safety is a concern.
A) High humidity can accelerate the curing process, whereas low humidity may slow it down. Adjust your working times accordingly.
A) It is generally incompatible with non-porous substrates like metals and some plastics without proper surface treatment.
A) Once cured, Soudal 65A can only be removed mechanically, such as by sanding or scraping.
A) It should not be used in areas where it will be submerged in water or exposed directly to the elements without protective measures.
A) Typically, if stored properly, Soudal 65A can last up to a year without losing its effectiveness?
A) Yes, it offers robust end strength capable of handling heavy loads, but for load-bearing applications, additional reinforcements may be required.
A) Dispose of according to local regulations for chemical products. Do not pour down the drain or into the environment.
A) Thinning is not recommended as it can affect the performance and water resistance of the adhesive. Always use as directed to ensure the best results.
Coming Soon
Description
Application
FAQ's
Data Sheets
Spend another £100.00 for free UK mainland delivery!
